RICE TECHNICAL PROTOCOL (DIRECT SEEDED)

1-Seed Treatment

image1

3 DBS (3 Days Before Seeding)

Soak rice seeds for 24 hours in a solution

of Humusplus at 10-20g + Fortem at 20mL/16L of water.

2-Basal Application

image2

2 DBS

Broacast 4-8 packs of Nahum with 4bags 14-14-14 or 16-20-0

3-Molluscicide Use

image3

1 DBS or DAS (Days After Seeding)

Spray SeekKill at 20grams per 16 litres of water. Use 12tank loads per ha. (Water depth in field should be 1 cm)

4-Molluscicide Use

image4

1 DAS

Spot Application of SeekKill at 20g/16L of water. If lot of Golden Apple Snail, escape from the first application.

5-Foliar Application

image5

7 DAS

Spray Humusplus at 10-20g and Imperium-X at 10mL per 16L of water. Use 12 tank loads/ha.

6-Foliar & Bio-Insecticide

image6

14 DAS

Spray Humusplus at 10-20g + ImperiumX at 10mL + Forteplus F1/F2 (for stemborer/BPH, GLH, etc.) at 20mL to 40mL per 16L of water. Use 12 tank loads per ha. 

If there is no insect infestation, apply only fertilizers.

7-Tillering Stage

image7

21 DAS - Fertilizer & Bio-Insecticide Application

Spray Humusplus at 20-30g + Forteplus F1/F2 (vs stemborer, leaf and plant hoppers) at 20g per 16L of water. Use 12 tanks loads per ha. If there is no insect infestation, apply only the fertiliser.

8-Anti-Diseases

image8

28 DAS

Spray Humusplus at 20-30g + Fortem (vs rice leaf blasts, bacterial blight and tungro) at 20mL/16L of water. If there is no disease infection, apply only fertilizer.

9-Maximum Tillering

image9

35 DAS

Repeat the 28 DAS application.

10-Panicle Initiation

image10

40-45 DAS 

Spray Humusplus at 10-20g + ImperiumX at 10mL + Fortem (for health blight and bacterial blight) at 20mL/16L of water. Use 12 tank loads/ha.

RICE PROTOCOL (TRANSPLANTED)

1-Seed Treatment

image11

0 Day After Soaking

Soak rice seeds in a solution of Humusplus at 10g/16L of water for 24 hours.

2-Care of Seedlings

image12

3 Days After Soaking

Seed bed, wet bed method. Broadcast germinated seedlings on the seed bed. Spray seed bed with Humusplus at 20g/16L of water.

3-Care of Seedlings

image13

7 Days After Broadcasting on Seed Beds. Spray seed beds with Humusplus at 20g/16L of water.

4-Care of Seedlings

image14

14 Days After Broadcast non-seed beds.

Repeat the 7th day application. Spray F1/F2 at 20mL/16L of water.

5-2days Before Transplanting

image15

2 Days Before Transplanting or 20 Days After Broadcasting Seeds on seed beds. Broadcast 4 to 8 packs of Nahum mixed with 4 bags 14-14-14 or 16-20-0 fertiliser to the field. Uproot seedlings from the bed.

6-1day Before Transplanting

image16

1 Day Before Transplanting

Spray SeekKill at 20g/16L of water. Use 12 tank loads per hectare. Water depth in the field should be 3 to 5 cm.

7- (0 Day Before Transplanting)

image17

0 Days After Transplanting

Apply spot treatment of SeekKill at 20g/16L of water to care of snails that escape the 1st application. Use 12 tank loads per hectare.

8-After Transplanting

image18

After Transplanting

The fertilization, pest disease management to be employed in the transplanted method is similar to the direct seedling method. 

CORN TECHNICAL PROTOCOL

1-SEED TREATMENT

image19

(0 DAS) Days After Seeding

Coat corn seed with 10g Humusplus and 20mL Fortem (protect the seed from soil pathogens). Make sure that seeds are uniformly coated. Sow seeds immediately after treatment.

2-BASAL APPLICATION

image20

(0 DAS)

Broadcast into furrows 4 to 8 packs Nahum mixed with 4 bags 14-14-14 or 16-20-0. Cover fertilizer with thin layer of soil before sowing seeds.

3-INSECTICIDE

image21

(7 DAS)

1st Bio-insecticide Application (If insects are present). Spray Forteplus F1 at 20 to 40g and Humusplus at 20g per 16 liters of water (against whorl maggots). Continue spraying Forteplus F1 two (2) more times at 7 DAI (vs corn borer)

4-BIO-FUNGICIDE (14 DAS)

image22

Bio-fungicide Application. If symptoms off disease (downey mildew, corn, rust, etc.) are present in the field or as soon as their symptoms are observed, spray Fortem at 10 to 20mL plus Humusplus at 10 to 20g/16liters of water. Spray 3 to 4 times at weekly interval. If no disease are noted in the field, spray only Humusplus at the above rates.

5-(21 DAS) and (27-30DAS)

image23

(21 DAS)

Foliar Application. Spray Humusplus at 10 to 20g/16 liters of water. 


(27-30DAS)

Foliar Application. Spray Humusplus Supreme or Humuplus at 10 to 20g plus Imperium-X at 10mL/16L of water.

6-(35-40DAS)

image24

Foliar Fertilizer Application and Bio-Insecticide Application. Spray Humusplus Supreme or Humusplus at 10 to 20g plus Imperium-X at 10mL plus Forteplus F1 (vs corn borer and earworm, etc.) at 20 to 40mL/16 liters of water.

7-(37-45 DAS)

image25

Foliar Application and Bio-Insecticide Application. Spray Humusplus Supreme or Humusplus at 10 to 20g plus Imperium-X at 10mL plus Forteplus F/F2 (vs corn borer and earworm, aphids, etc.) at 20 to 40 mL per 16 liters of water. Continue spraying Forteplus F1/F2 at 20 to 40mL per 16 liters of water, 2-3x at 7 days interval. If there is no insect infestation, spray only the fertilizers.

8-(47-55 DAS)

image26

Foliar Fertilizer Application (last application sweet corn). Spray Humusplus Supreme or Humusplus at 10 to 20g per 16 liters of water.

9-(65 DAS)

image27

Foliar Fertilizer Application (only for grain corn). Spray Humusplus Supreme or Humusplus at 10 to 20g per 16 liters of water.

VEGETABLES (OPEN GARDEN)-cabbage, BROCCOLI, lettuce, pechay, etc.

1-(5 DBP)

image28

(1) Mix 40g of HPL and 40g of NAH per 16L of water then spray. (2) Add SKP to control slugs at 20g. (3) Add FTM at 10mL to prevent diseases. (4) Use 150g per hole of chicken dung for basal.

2-(7 DAP)

image29

(1) Dilute 10g of HPL and 10mL of IMPX to 16L of water then spray. (2) To control pests and diseases, add 10mL of FTM and 20mL of F1 and/or F2 if necessary.

3-(14 DAP)

image30

Repeat the same application as 7DAP

4-(21 DAP)

image31

 (1) Mix 4 sachets of HPL and 4 sachets of NAH to either 46-0-0 or 21-0-0 fertilizer and apply it to the plants at rate of 45g per plant. (2) Spray 10mL IMPX with 20mL F1 and/or F2. at rate of 16L per mixture. (4) Add FTM if needed.

5-(28 DAP)

image32

(1) Spray a mixture of 10g of HPL and 10mL of IMPX per 16L of water. (2) Add FTM if needed or for prevention at 10mL per 16L.

6-(35 DAP)

image33

(1) Spray a mixture of 10g of HPL and 10mL of IMPX per 16L of water. (2) Add FTM if needed or for prevention at 10mL per 16L. (3) Mix SKP at 20g/16L for slugs control.

7-(42 DAP)

image34

(1) Repeat Methods of 28DAP. (2) Apply F1 and F2 if insects occur at 20mL/16L of water.

8-(49 DAP)

image35

(1) Repeat Methods of 28DAP. (2) Apply F1 and F2 if insects occur at 20mL/16L of water.

9-(56 DAP)

image36

(1) Repeat Methods of 28DAP. (2) Apply F1 and F2 if insects occur at 20mL/16L of water.

10-(63 DAP)

image37

(1) Repeat Methods of 28DAP. (2) Apply F1 and F2 if insects occur at 20mL/16L of water.

11-(70 DAP) & (77 DAP)

image38

(1) Repeat Methods of 28DAP. (2) Apply F1 and F2 if insects occur at 20mL/16L of water.

12-(84 DAP)

image39

(1) Repeat Methods of 28DAP. (2) Apply F1 and F2 if insects occur at 20mL/16L of water. (3) Add 150g/16L of SKP to control more slugs

VEGETABLES LIKE EGGPLANT, CHILLI, OKRA

1-(0-3 DAT)

image40

(1) Mix completely 1 sachet of HPL and 1 sachet of NAH to the soil of the seedling with 15kg of 14-14-14 fertilizer and 20kg of 0-22-0. (2) Spray IMPX with FTM at the rates of 10mL per 16L of water

2-(7 DAT)

image41

(1) Spray HPL at a mixture of 10kg/16L of water. (2) Add to the mixture 10mL of IMPX, 10mL of FTM, and 10mL of F1 for insect and diseases control.

3-(14 DAT)

image42

(1) Spray HPL at a mixture of 10kg/16L of water. (2) Add to the mixture 10mL of IMPX, 10mL of FTM, and 10mL of F1 for insect and diseases control.

4-(21 DAT)

image43

(1) Spray HPL at a mixture of 10kg/16L of water. (2) Add to the mixture 10mL of IMPX, 10mL of FTM, and 10mL of F1 for insect and diseases control. (3) Dilute 1 sachet of NAH and 5kg of 21-0-0 to 200L of water and side dench.

5-(28 DAT)

image44

(1) Spray HPL at a mixture of 10kg/16L of water. (2) Add to the mixture 10mL of IMPX, 10mL of FTM, and 10mL of F1 for insect and diseases control.

6-(35 DAT)

image45

(1) Dilute 1 sachet of HPL and 1 sachet of NAH to 200L of water with 5kg 0-0-60, 0-22-0, and 21-0-0-24S and drench; (2) spray IMPX at a rate of 10mL/16L of water mixed with 10mL F1 to prevent/cure insect and diseases.

7-(45 DAT)

image46

(1) Dilute 1 sachet of HPL and 1 sachet of NAH to 200L of water with 5kg 0-0-60, 0-22-0, and 21-0-0-24S and drench; (2) spray IMPX at a rate of 10mL/16L of water mixed with 10mL FTM and 10mL F1 and/or F2 to prevent/cure insect and diseases.

8-(55 DAT)

image47

(1) Dilute 1 sachet of HPL and 1 sachet of NAH to 200L of water with 5kg 0-0-60, 0-22-0, and 21-0-0-24S and drench; (2) spray IMPX at a rate of 10mL/16L of water mixed with 10mL FTM and 10mL F1 and/or F2 to prevent/cure insect and diseases.

9-(65 DAT)

image48

(1) Dilute 1 sachet of HPL to 16L of water with 10kg of 0-0-60 and 10kg of 21-0-0-24s side drench.

10-(75 DAT)

image49

(1) Dilute 1 sachet of HPL and 1 sachet of NAH to 200L of water with 20kg 0-0-60, 10kg 0-22-0, and 20kg 21-0-0-24S and drench; (2) spray IMPX at a rate of 10mL/16L of water mixed with 10mL FTM and 10mL F1 and/or F2 to prevent/cure insect and diseases.

11-(85 DAT)

image50

(1) Spray a mixture 10mL of IMPX, 10mL of FTM, and 10mL of F1 for insect and diseases control to 16L of water.

12-(95 DAT)

image51

(1) Dilute 1 sachet of HPL and 1 sachet of NAH to 200L of water with 10kg 0-0-60, and 10kg 21-0-0-24S and drench; (2) spray IMPX at a rate of 10mL/16L of water mixed with 10mL FTM and 10mL F1 and/or F2 to prevent/cure insect and diseases.